View A050FW01V1_3488642.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

customer approval sheet company name model a047fw01 v1 customer approved approval for specifications only (spec. ver. 0.2 ) approval for specifications and es sample (spec. ver. 0.2 ) approval for specifications and cs sample (spec. ver. 0.2 ) customer remark : auo pm : p/n : 97.04a19.100 comment : doc. version : 0.2 total pages : 22 date : 2009/04/06 www.datasheet.co.kr datasheet pdf - http://www..net/
all rights strictly reserved. any portion of this pa per shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. product specification 4.7" color tft-lcd module/panel model name: a047fw01 v1 < >preliminary specification < >final specification note: the content of this specification is subject to change. ? 2009 au optronics all rights reserved, do not copy. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 1/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. record of revision version revise date page content 0.0 first draft 3 add panel weight 6 update drawing ( change label outline ) 8 update current consumption 13 update power on/off characteristics 14 update optical specification (brightness spec & ad d rgb chromaticity) 20 add packing form 0.1 2009/03/30 21 update panel label information 0.2 2009/04/06 13 update power on/off characteristics www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 2/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. contents a. general information................................ ................................................... .................................................. 3 b. outline dimension .................................. ................................................... .................................................. 4 c. electrical specifications .......................... ................................................... ................................................ 5 1. tft lcd panel pin assignment .................... ................................................... .......................................... 5 2. absolute maximum ratings........................ ................................................... .............................................. 7 3. electrical dc characteristics...................... ................................................... .............................................. 8 4. electrical ac characteristics ...................... ................................................... ............................................ 10 5 . power on/off characteristics ...................... ................................................... ........................................... 13 d. ptical specification ............................... ................................................... .................................................. 1 4 e. reliability test items ............................. ................................................... ................................................. 17 f. packing and marking ................................ ................................................... .............................................. 20 1. packing form ...................................... ................................................... ................................................... 20 2. module/panel label information .................. ................................................... .......................................... 21 3. carton label information........................ ................................................... ................................................ 21 g. precautions ........................................ ................................................... ................................................... .. 22 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 3/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. a. general information this product is for pnd application. no. item unit specification remark 1 screen size inch 4.7(diagonal) 2 display resolution dot 480rgb(h)272(v) 3 overall dimension mm 114.24(h) 72.88(v) 3.15 (t) note 1 4 active area mm 103.68(h)58.752(v) 5 pixel pitch mm 0.216(h)0.216(v) 6 color configuration -- r. g. b. stripe note 2 7 color depth -- 16.7m colors 8 ntsc ratio % 50 9 display mode -- normally white 10 touch panel surface treatment -- hard coating (ag haze 8% ) 3h 11 weight g 54 12 viewing direction 6 oclock (gray inversion) note 1: not include blacklight cable and fpc. refer next page to get further information. note 2: below figure shows dot stripe arrangement. note 3: please refer to electrical characteristics chapter. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 4/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transforme d to any other forms without permission from au optronics corp. b. outline dimension www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 5/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. c. electrical specifications 1. tft lcd panel pin assignment recommended connector : fh23-45s-0.3shw pin no symbol i/o description remark 1 gnd g gnd 2 gnd g gnd 3 vdd pi power supply : 2.5v or 3.3v 4 vdd pi power supply : 2.5v or 3.3v 5 r0 i red data signal (lsb) 6 r1 i red data signal 7 r2 i red data signal 8 r3 i red data signal 9 r4 i red data signal 10 r5 i red data signal 11 r6 i red data signal 12 r7 i red data signal (msb) 13 g0 i green data signal ( lsb ) 14 g1 i green data signal 15 g2 i green data signal 16 g3 i green data signal 17 g4 i green data signal 18 g5 i green data signal 19 g6 i green data signal 20 g7 i green data signal (msb) 21 b0 i blue data signal ( lsb ) 22 b1 i blue data signal 23 b2 i blue data signal 24 b3 i blue data signal 25 b4 i blue data signal 26 b5 i blue data signal 27 b6 i blue data signal 28 b7 i blue data signal ( msb) 29 gnd g gnd 30 dclk i pixel clock 31 disp i display on/off signal 32 hsync i horizontal synchronizing signal 33 vsync i vertical synchronizing signal 34 de i data enable www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 6/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 35 pwr_sel g vdd power select; low : 2.5v, high : 3.3v 36 gnd g gnd 37 nc - reserved for touch panel 38 nc - reserved for touch panel 39 nc - reserved for touch panel 40 nc - reserved for touch panel 41 gnd g gnd 42 vled1- pi led1 backlight cathode 43 vled1+ pi led1 backlight anode 44 vled2- pi led2 backlight cathode 45 vled2+ pi led2 backlight anode i: input pin; p: power pin; g: ground pin; c: capacit or pin www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 7/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 2. absolute maximum ratings values items symbol min. max. unit condition power supply voltage vdd -0.3 4.5 v interface supply voltage vddio -0.3 4.5 v led reverse voltage v r 3.2 3.5 v one led led forward current i f -- 25 ma one led operation temperature t op -20 70 ? c storage temperature t st -40 80 ? c note 1.if the operating condition exceeds the absolu te maximum ratings, the tft-lcd module may be damaged permanently. also, if the module operated w ith the absolute maximum ratings for a long time, its reliability may drop www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 8/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 3. electrical dc characteristics a. typical operation condition (agnd =gnd = 0v) item symbol min. typ. max. unit remark vddio 1.65 1.8 vdd v digital power supply power voltage vdd 3.0 3.3 3.6 v analog power supply h level vih 0.7xvddio -- vddio v input signal voltage l level vil gnd -- 0.3xvddio v b. current consumption (agnd=gnd=0v) parameter symbol condition min. typ. max. unit remark i vdd vdd=3.3v - 11 12 m a note 1, 2 input current for vdd i vdd (standby) vdd=3.3v - 10 11 ua note 3 i vddio vddio=3.3v - 44 45 u a note 1, 2 input current for vddio i vddio (standby) vddio=3.3v - 41 42 ua note 3 note 1:test condition is under typical eletrical dc and ac characteristics. note 2: test pattern is the following picture. note 3:in standby mode, all digital signals are sto pped. ex. dclk, hsync ..etc. c. backlight driving conditions the backlight (led module, note 1) is suggested to dr ive by constant current with typical value. parameter symbol min. typ. max. unit remark led current i l 20 22 ma note 1 power consumption p l 704 847 mw led life time l l 10,000 --- --- hr note 2, 3 note 1: led backlight is two parallel strings and o ne led for each string is as below figure. suggest to drive by 20ma for each led string. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 9/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. note 2: define led lifetime: brightness is decrea sed to 50% of the initial value. led lifetime is restricted under normal condition, ambient temperatur e = 25 and led lightbar current = 35ma. note 3: if it uses larger led lightbar voltage/ curr ent more than 25ma, it maybe decreases the led lifetime. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 10/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 4. electrical ac characteristics a. signal ac characteristics parameter symbol min. typ. max. unit remark dclk duty cycle -- 40 50 60 % t cw / t dclk x100% clk pulse duty t cwh 40 -- -- ns clk pulse duty t cwl 40 -- -- ns data setup time tdsu 12 -- -- ns data hold time tdhd 12 -- -- ns de setup time tdesu 12 -- -- ns de hold time tdehd 12 -- -- ns vsync setup time tvst 12 -- -- ns vsync hold time tvhd 12 -- -- ns hsync setup time thst 12 -- -- ns hsync hold time thhd 12 -- -- ns www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 11/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. b. input timing parameter symbol min. typ. max. unit. remark dclk frequency 1/tdclk 5 9.2 12 mhz frame frequency cycle tv 16.7 ms cycle tv 275 288 335 h display period tvdisp 272 h front porch tvfp 1 4 -- h pulse width tvw 1 10 -- h 1 frame scanning time back porch tvbp 2 12 -- h cycle th 490 531 605 dclk display period thdisp 480 dclk front porch thfp 2 8 -- dclk pulse width thw 1 1 -- dclk 1 line scanning time back porch thbp 8 43 -- dclk note 1: sync mode just can be used on the typical timing setting. c.timing diagram vertical timing of input(sync-de mode) vsync hsync de input data first line last line vertical timing of input(sync mode) www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 12/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. horizontal timing of input(sync mode) horizontal timing of input (sync-de mode) www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 13/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 5 55 5 . power on/off characteristics a. recommended power on sequence vdd ,vddio pvdd vsync disp vdd2 norm al output = 0v vgh vled vgl black pattern vsync vdd2 norm al source output output = 0v vgh vled vgl 1 frame 2 frame 1 frame 2 frame 2 frame normal output = 0v normal vcom output = 0v >2ms >5ms 14~20ms notes: the driver ic default is on standby mode. it c an be changed to normal operation by using disp hard pin. b. recommended power off sequence ic internal sequence uo confidential for linkconcept internal use only / 2010/3/30 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 14/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. d. ptical specification all optical specification is measured under typical co ndition (note 1, 2) item symbol condition min. typ. max. unit remark response time rise fall tr tf =0 -- -- 15 20 ms ms note 3 contrast ratio cr at optimized viewing angle 300 400 -- note 4 top bottom left viewing angle right c r 1 0 50 55 65 65 -- -- -- -- deg. note 5 brightness y l =0 350 440 -- cd/m 2 note 6 x =0 0.26 0.31 0.36 white y =0 0.28 0.33 0.38 x =0 0.53 0.58 0.63 red y =0 0.29 0.34 0.39 x =0 0.29 0.34 0.39 green y =0 0.53 0.58 0.63 x =0 0.1 0.15 0.2 chromaticity blue y =0 0.04 0.09 0.14 uniformity y l % 75 80 -- % note 7 note 1: ambient temperature =25 , and led lightbar voltage v l = 12 v. to be measured in the dark room. note 2: to be measured on the center area of panel w ith a viewing cone of 1 by topcon luminance meter bm-5a, after 15 minutes operation. center of the screen field=1 note 3: definition of response time: bm-5a auo confidential for linkconcept internal use only / 2010/3/30 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 15/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. the output signals of photo detector are measured w hen the input signals are changed from black to white(falling time) and from white to black(rising time), respectively. the response time is defined as the time interval between the 10% and 90% of amplitudes. refer to figure as below. s i g n a l ( r e l a t i v e v a l u e ) "black" tr tf "white" "white" 0% 10% 90% 100% note 4.definition of contrast ratio: contrast ratio is calculated with the following for mula. status black" " at is lcd when output detector photo status white" " at is lcd when output detector photo (cr) ratio contrast = note 5. definition of viewing angle, , refer to figure as below. x' y x y' note 6. measured at the center area of the panel wh en all the input terminals of lcd panel are electrically opened. note 7: luminance uniformity of these 9 points is d efined as below: auo confidential for linkconcept internal use only / 2010/3/30 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 16/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 9) - (1 points 9 in luminance maximum 9) - (1 points 9 in luminance minimum uniformity = auo confidential for linkconcept internal use only / 2010/3/30 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 17/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. e. reliability test items no. test items conditions remark 1 high temperature storage ta= 8 0 240hrs 2 low temperature storage ta= -4 0 240hrs 3 high ttemperature operation tp= 7 0 240hrs 4 low temperature operation ta= -2 0 240hrs 5 high temperature & high humidity tp= 6 0 . 90% rh 240hrs operation 6 heat shock -25 ~ 7 0 , 50 cycle, 2hrs/cycle non-operation 7 electrostatic discharge contact = 4 kv, class b air = 8 kv, class b note 5 frequency range : 8~33.3hz stoke : 1.3mm sweep : 2.9g ,33.3~400hz 2 hours for each direction of x,y,z 8 vibration 4 hours for y direction non-operation jis c7021, a-10 condition a : 15 minutes 9 mechanical shock 100g . 6ms, x,y,z 3 times for each direction non-operation jis c7021, a-7 condition c 10 vibration (with carton) random vibration: 0.015g 2 /hz from 5~200hz C6db/octave from 200~500hz iec 68-34 11 drop (with carton) height: 60cm 1 corner, 3 edges, 6 surfaces 12 pressure 5kg, 5sec note 7 note 1: ta: ambient temperature. tp: panel surface temperature note 2: in the standard conditions, there is not dis play function ng issue occurred. all the cosmetic specification is judged before the reliability stres s. note 3: all the cosmetic specification is judged befor e the reliability stress. note 4: temperature and relative umidity range is s hown in the figure below auo confidential for linkconcept internal use only / 2010/3/30 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 18/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. note5 : all test techniques follow iec6100-4-2 stan dard. test condition note pattern procedure and set-up contact discharge 330?, 150pf, 1sec, 5point, 10times/point air discharge 330?, 150pf, 1sec, 5 point, 10times/point criteria a C normal operation. no degradation. no failures b C some performance degradation allowed. no data lo st. self-recoverable. no hardware failures. c C temporary performance degradation. recovery by operator is acceptable. no hardware failures. d C hardware failures. note 6: 1. the metal casing is connected to ground (0v) at fo ur corners. 2. all register commands are repeating transferred. 3. judging the result after discharging. auo confidential for linkconcept internal use only / 2010/3/30 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 19/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. loading lcm auo confidential for linkconcept internal use only / 2010/3/30 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 20/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. f. packing and marking 1. packing form auo confidential for linkconcept internal use only / 2010/3/30 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 21/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 2. module/panel label information the module/panel (collectively called as the product ) will be attached with a label of shipping number which represents the identification of the product at a specific location. refer to the product outline dra wing for detailed location and size of the label. the label is composed of a 22-digit serial number with the fol lowing definition: example: 1690012ab: product manufacturing week code: wk16 product manufacturing year code: year 2009 3. carton label information the packing carton will be attached with a carton lab el where packing qty, auo model name, auo part number, customer part number (optional) and a serie s of carton number in 13 or 14 digits are printed. the carton number is apparing in the following format: refer to the drawing of packing format for the locat ion and size of the carton label. year code , the production week when the product is finished at its production process week code , the production week when the product is finished at its production process auo a047fw01 v1 module code for internal system usage and production serial numbers . auo confidential for linkconcept internal use only / 2010/3/30 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 22/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. g. precautions 1. do not twist or bend the module and prevent the unsuitable external force for display module during assembly. 2. adopt measures for good heat radiation. be sure to use the module with in the specified temperature . 3. avoid dust or oil mist during assembly. 4. follow the correct power sequence while operating . do not apply the invalid signal, otherwise, it wi ll cause improper shut down and damage the module. 5. less emi: it will be more safety and less noise. 6. please operate module in suitable temperature. t he response time & brightness will drift by differe nt temperature. 7. avoid to display the fixed pattern (exclude the white pattern) in a long period, otherwise, it will cause image sticking. 8. be sure to turn off the power when connecting or d isconnecting the circuit. 9. polarizer scratches easily, please handle it caref ully. 10. display surface never likes dirt or stains. 11. a dewdrop may lead to destruction. please wipe o ff any moisture before using module. 12. sudden temperature changes cause condensation, an d it will cause polarizer damaged. 13. high temperature and humidity may degrade perfo rmance. please do not expose the module to the direct sunlight and so on. 14. acetic acid or chlorine compounds are not friends with tft display module. 15. static electricity will damage the module, please do not touch the module without any grounded device. 16. do not disassemble and reassemble the module by self. 17. be careful do not touch the rear side directly. 18. no strong vibration or shock. it will cause module broken. 19. storage the modules in suitable environment wit h regular packing. 20. be careful of injury from a broken display module. 21. please avoid the pressure adding to the surface (front or rear side) of modules, because it will cau se the display non-uniformity or other function issue. auo confidential for linkconcept internal use only / 2010/3/30 www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of A050FW01V1

	To Download A050FW01V1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .